Articles from ThomasNet
Coated Abrasive Product employs ceramic grain.
2008-10-17 08:36:07.0
Designed to work with heat-sensitive materials such as stainless steel, titanium alloys, and superalloys, CRIMSON red SK855X features aggressive grain orientation and cool cut feature to optimize cut rate. Self-sharpening ceramic grain promotes service life, and available grits range from 24-120. Suited for medium- to high-pressure backstand and power assist applications, solution can satisfy various grinding applications in belt and disc form. This story is related to the following:Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceSearch for suppliers of: Abrasive Belts | Abrasive Bands | Abrasives ...read more
Submersible Rotary Indexing Spindle is suited for EDM.
2008-10-17 08:36:05.0
In addition to bearings with minimum radial run-out, H80R.MNCM incorporates AC variable speed motor and Heidenhain encoder for direct measurement positioning of ±5 arc sec. Programmable variable speed AC control (H1625.AC3) allows adjustment of continuous high-speed rotation and indexing, which can be used for automatic operation via M-Code. Spindle can also be integrated directly to certain machine controls, allowing high-speed rotation, indexing, and turn while burn applications. This story is related to the following:Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceMechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric MotorsSearch for suppliers of: Special Spindles | Machining Center Spindles | High Speed Spindles | Spindles ...read more
Cutting Fluid has low foaming/low mist properties.
2008-10-16 08:54:33.0
Effective in range of operations from surface and centerless grinding to broaching, gear hobbing, surface, pocket, and thread milling, TRIM® E906 emulsion has balance of cooling and lubrication that extends tool life and surface finishes. Tight emulsion reduces carryoff and gets fluid to point of cut. E906 does not contain phenol, is removed with water, working solution, or TRIM® CLEAN aqueous cleaners, and can be recycled or disposed of with conventional techniques and equipment. This story is related to the following:LubricantsMachinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceMaterials and Material ProcessingSearch for suppliers of: Cutting Lubricants | Metal Cutting Fluids | Emulsions ...read more
Laser Cutting System processes 4 x 2 m sheet sizes.
2008-10-16 08:54:21.0
Incorporating linear drive technology, Axel 4020 features high-pressure cutting head that can hold 5, 7.5, or 10 in. cutting lens, and includes safety system that protects it from collision with workpiece. Machine is capable of processing thin material at speeds up to 1,574 in./min and thick material up to 1 in. mild steel. Providing accurate reproduction of programmed contours, integrated 32-bit control includes mathematical capabilities as well as extensive material library. This story is related to the following:Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceSearch for suppliers of: Cutting Lasers ...read more
Semi-Automatic Band Saw is designed for production work.
2008-10-15 08:29:19.0
Featuring single-button operation, Model KS450 is designed for production work requiring sawing of solids and structural shapes up to 14 in. at 90° in full cycle, semi-automatic operation as well as double mitering (60° to left/right) with variable-speed blade from 60-360 fpm. Saw frame is canted 5° to facilitate cut through bottom of structural section without vibration or slowdown. Other features include fully hydraulic operation and free-standing operator console. This story is related to the following:Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceSearch for suppliers of: Sawing Machinery | Mitering Band Saws | Band Saws ...read more
Lab Grinder features precision operation.
2008-10-15 08:29:17.0
LPP 6.5 roller-style Gran-U-Lizer(TM) grinds material to narrow particle size distribution, with few unwanted fines, while minimizing impact and heat generation during process. Suitable for achieving results on lab and pilot plant scale, precision particle reduction solution offers independent control over roll gap, with accuracy to 0.0005 in.; roll shear ratio, with independent drive control for each roll; and roll corrugations, with sizes and shapes tailored for application. This story is related to the following:Waste Handling EquipmentMaterials and Material ProcessingMachinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceSearch for suppliers of: Size Reduction Equipment | Grinding Mills | Granulating Machinery ...read more
Satellite Terminals expand wideband tactical communications.
2008-10-15 08:29:13.0
Designed to military standards (MIL-STD-810F) for operations in harsh environments, RF-7800B Broadband Global Area Network tactical satellite terminals extend capability of transmission/reception of TOP SECRET global wideband data communications. They provide end-to-end Type-1 HAIPE-certified security when linked to Falcon III manpack radios or SecNet 54® encryption modules and can also be utilized as stand-alone terminals in other configurations to extend voice and data connectivity. This story is related to the following:Communication Systems and EquipmentMachinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceComputer Hardware and PeripheralsSearch for suppliers of: Satellite Communication Systems | Communications Network Routers ...read more
Grinding Mill suits mining industry applications.
2008-10-15 08:29:10.0
Rated to 3,000 hp, high-capacity Vertimill reduces number of mills required in secondary grinding applications for mining industry. Design employs minimal moving parts to reduce maintenance concerns but also minimizes energy as well as grinding media consumption. Product is typically used in concentrate regrind applications with fine feed and product size. This story is related to the following:Materials and Material ProcessingMachinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceSearch for suppliers of: Grinding Mills | Mills ...read more
Tube Cutting Machine handles multi-purpose applications.
2008-10-14 08:43:59.0
Model 618 Automatic Cutter offers cylindrical, standard square, and thin square cuts in widths from 0.010-18 in, suiting tube cutting applications for seals, rings, and gaskets. Featuring digital touch screen controls and digital operating components, it also has mandrel with adjustable length from 18-1 in. and stock from 6 in. OD to minimum extrudable size that will fit mandrel and Rheostat-controlled mandrel speed from 0-2,700 rpm. This story is related to the following:Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceSearch for suppliers of: Tubing Cutters | Tubing Cut-Off Machinery | Automated Machinery ...read more
Pneumatic Grinders are suited for SS and aluminum.
2008-10-14 08:43:59.0
Targeting stainless steel fabricators as well as those working with aluminum, 330 RAD series geared grinders feature small head, in both diameter and height, allowing use in tight, space restricted surface areas. Available with .4 or .7 hp motor, right angle grinders are suitable for precision surface condition and finishing. Various speeds are available to meet surface and abrasive requirements. This story is related to the following:Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with ExcellenceSearch for suppliers of: Pneumatic Grinders | Hand Grinders ...read more
© Saved Search Pro, Inc.
